Oil monitoring system is a positive step to achieve proper
Lubrication. There are two methods:
1 .Performing routine periodical oil analysis and trending the results to determine quality of oil.
2. Using condition monitoring devices. There are many available devices in the market that provide moisture/water levels, viscosity levels, vibration analysis, etc.
Using one or both of above methods to determine when oil
Changes are required should be based more on need basis rather than routine to achieve long term benefit from cost and reliability point of view...
Steps for effective lubrication for improved longevity:
- Evaluate current lubrication methods and procedure
- Set target cleanliness levels
- Identify sources of contaminations & degradation mechanism
- Take specific actions to achieve targets
- Analyze lubricant health frequently
- Distribute the results - increase visibility
Hello there! I am glad to stop by your site and know more about Reliability Centered Maintenance. Keep it up! This is a good read. You have such an interesting and informative page. I will be looking forward to visit your page again and for your other posts as well. Thank you for sharing your thoughts about Reliability Centered Maintenance.
ReplyDeleteRCM also offers specific criteria to use when selecting a risk management strategy for a system that presents a specific risk when it fails. Some are technical in nature (can the proposed task detect the condition it needs to detect? does the equipment actually wear out, with use?). Others are goal-oriented (is it reasonably likely that the proposed task-and-task-frequency will reduce the risk to a tolerable level?). The criteria are often presented in the form of a decision-logic diagram, though this is not intrinsic to the nature of the process.
The fastest and most efficient way to facilitate the analysis uses two fully certified co-facilitators to lead the analysis. Co-facilitation RCM Service combines the expertise of our most experienced RCM Blitz™ facilitators with the experience of our PM/PdM program managers.
Reliability Centered Maintenance services